Frequently Asked Questions
How much will my transfer cost?
Are heat
transfers permanent? Will they come off in the wash?
Can I
apply the transfers with a domestic iron?
Can they been
changed or removed after application?
How long will it take
for my transfers to be completed?
Are you able to apply my
transfers to the garments?
Can you supply the garments for
me?
Is there a minimum number of transfers I have to
order?
Is there a discount for large quantities?
I have a heat press and want to apply the transfers myself. What is
the best way to do this?
Can you design something for
me?
Can you match my PMS colour?
What format do I need to supply my logo/artwork in?
Can you use the logo/image from my website?
How much will my transfer cost?
The price of tranfers depends on various factors including size, qty, transfer type & colours and suitable artwork. Please request a quote, along with emailing us your artwork, for an obligation free quote.
Are heat transfers permanent? Will they come off in the wash?
Permacut and Versacamm transfers are permanent and colourfast, and provided the appropriate care is taken when washing they will not peel off. Ironing over transfer, tumble drying & drycleaning will damage the transfer.
Transfer Papers are not colourfast, and are therefore recommended for "one off" use. e.g. for birthdays, stag or hens nights T-shirts
For further care instructions please click here.
Can I apply the transfers with a domestic iron?
No, it is not recommended as constant heat, pressure, and correct time is needed for adhesion to garments. A commercial heat press is required.
Can they be changed or removed after application?
If you want to change or replace the original transfer, then in some cases, it is possible to apply a new transfer over the top. However, Permacut and Versacamm can leave behind a residue, therefore we do not recommend their removal. For more advice on your options, please call us or bring the garment into our showroom.
How long will it take for my transfers to be completed?
Turnaround always depends on current workload. Please contact us with your requirements so we can give you a timeframe.
Are you able to apply my transfers to the garments?
We are able to press the transfers that we produce to your garments. However, we can apply transfers that were produced elsewhere so long as application details i.e heat/pressure/time are provided, due differences in materials used by other manufacturers.
Can you supply the garments for me?
Yes, we have a wide range of T-shirts, clothing samples and catalogues in our showroom for you to choose from or look at. In most cases we can have your order here by the following working day. You are most welcome to provide your own garments.
Is there a minimum number of transfers I have to order?
No. Due to the low set up fees, our transfers are cost effective in small quantities and therefore are ideal for one off samples and designs for special occasions such as birthdays and stag or hens nights.
Is there a discount for large quantities?
Yes, our prices are quantity based. The larger the quantity, the less the transfer cost.
I have a heat press and want to apply the transfers myself. What is the best way to do this?
To view our pressing instructions click here.
Can you design something for me?
Absolutely. We have a graphic designer in house who will be more than happy to design something for you. Please contact us for a quote.
Can you match my PMS colour?
If your PMS colour does not suitably match one of our permacut colours then we can print the required colour on versacamm. Please note that due to variances in inks and media an exact match to a PMS colour is nearly impossible, although we can usually match it to within a few shades.
Artwork Questions
What format do I need to supply my logo/artwork in?
For computer cut graphics we need the artwork in vector format. If this is not possible we can redraw artwork from a good quality bitmap image, however artwork fees will apply.
Acceptable vector formats are: EPS, PDF, AI (Adobe Illustrator, up to version CS2) or CDR (Corel Draw, up to version 12). Please ensure that all fonts are created to outlines/converted to curves before saving.
For versacamm prints we require a high quality bitmap (300 dpi or higher) for photographic images. Vector format is still preferable for complex logos and designs as they can be enlarged without reducing quality. Otherwise a high quality bitmap image would be suitable.
Acceptable bitmap formats are: TIFF, JPG & PSD (Adobe Photoshop, up to version CS2). BMPs and GIFs are not acceptable. Please endeavour to provide the image at a resolution of 300 dpi and ensure it is the correct size. Images supplied at a smaller size (even when they are the correct dpi) will lose quality when enlarged.
For more information, click here to view our artwork specification sheet.
Can you use the logo/image from my website?
No. Websites images are low quality JPEGs or GIFs with a resolution of 72 dpi. While these are suitable for viewing on your screen, they are not suitable for printing. Although it is possible to physically increase the resolution to 300 dpi using a program such as Photoshop, this will not increase the quality of the image.