Application Instructions:

Standard Permacut, Specialty Permacut, SIR & Reflective:

Temp: 150° - 180° approx, depending on fabric
Pressure: Medium
Timing: 10 - 15 seconds

Cut in mirror image (the dull side) through the adhesive layer to the plastic backing, weed excess material, and lay the image on the fabric. Then cover the design area with release paper or a Teflon sheet. Press for 10 - 15 seconds then cold peel backing sheet when transfer is cool.

Allmark (for nylon/polymide)

Temp: 130° approx, depending on fabric
Pressure: Medium
Timing: 10 - 15 seconds

Cut in mirror image (the dull side) through the adhesive layer to the plastic backing, weed excess material, and lay the image on the fabric. Then cover the design area with release paper or a Teflon sheet. Press for 10 - 15 seconds then cold peel backing sheet when transfer is cool.

Flock

Temp: 160° approx, depending on fabric
Pressure: Medium
Timing: 10 - 15 seconds

Cut in mirror image (the dull side) through the adhesive layer to the plastic backing, weed excess material, and lay the image on the fabric. Then cover the design area with release paper or a Teflon sheet. Press for 10 - 15 seconds then cold peel backing sheet when transfer is cool.

Versaprint Application Instructions

Temp: 145° approx, depending on fabric
Pressure: Medium
Timing: 12 – 15 Seconds

Print image (do not mirror) onto versaprint media. Weed excess material then cover with high tack application tape. Remove clear backing and place onto garment. Press 12 - 15 seconds. then cold peel application tape when transfer is cool.